FORISING LED LIGHTING | LED Panel Light

sales@forisingled.com

LED Panel Light

(UGR<19)

Features

Input voltage:

Lumen efficiency:

CRI:

LED chip:

Light guide plate:

LED driver:

Power factor:

Frame colour:

CCT:

Dimming:

IP grade:

Working Temp.:

Lifespan:

Warranty:

AC200-240V, 50-60Hz or AC85-265V,50-60Hz

120lm/W, 100lm/W two option available

80 (customized CRI>90 can be available)

Epistar SMD4014

PMMA or PS

brand drivers (Meanwell, Philips, LIFUD, AGT,Greenso, BOKE,
etc), drivers with TUV, CB, ENEC approved, no flicker

0.95, THD<17

while, silver

3000K, 4000K, 5000K, 6000K(customized CCT available,
precise to ±100K)

Triac, 1-10V, DALI,RGB, RGBW, CCT dimming available

IP44 (IP65 available)

-40°C-50°C

50000 hours

3 years

Parameter

UGR<19 panel photos

Test Report: 600x600mm,40W

Test Report: 1200x300mm,40W

Luminous Decay Graph

Installation

1.Recessed installation (no need accessory for LED panel)

Picture 10: Turn LED panel 45 degree against the installation square space;

Picture 11 & 12: Upward the LED Panel for installation;

Picture 13 & 14: Turn LED Panel lighting face downword;

Picture 15: Finished installation;

Remark:

1) For recessed installation, first check the size’s fitting for the
panel light and the ceiling space;

2) No accessory for recessed installation;

3) Be sure all “+” and “-“ are jointed correctly;

4) Be sure all screws and connects are firmly fixed.

2.Suspended installation

Step 1: Attach hanging strings on led panel lights’ body

Picture 16: Take the hanging string;

Picture 17: Screw two nails to connect LED Panel with Hanging string;

Picture 18: Finished all hanging string, small size is four pieces, big size is six pieces;

Step 2: Attach hanging string to Ceiling

Picture 19: Open four φ5mm holes on the ceiling，and put holding parts inside, firmly fixed;

Picture 20: Screw the hanging ends inside;

Picture 21: Finish all screws and hanging the panel;

Picture 22: Connect LED Driver with state grid;

Picture 23： Finished installation and turn on power;

Remark:

1) Be sure all “+” and “-“ are jointed correctly;

2) Be sure all screws and connects are firmly fixed.

3.Imbedded installation(spring clips)

Step 1. Cut a hole on the ceiling and the cut-size need according to the actual size of the panel light.

Step 2. Connect cable to panel light correctly ,then press the spring buckle vertical and put the panel into the hole slowly.

Step 3. Reconfirm the cut-size and the cable-connection, then put down the spring buckle and make sure the panel has been fixed stable.

4. Mounted installation

Step 1. Install the mounted steel to the ceiling first, make sure it hold tightly with ceiling, fix well each screws.

Step 2. Put the panel to the steel, make sure each side fix well, then screw it tightly.

Patent design mounted frame( smart design, quick and easy installation, 2 minutes can install one light!)

Package info

LED panel size	pieces/ctn	carton size (cm)	G.W(KGS)	20 GP container can load (qty)	40 GP container can load (qty)	40 HQ container can load (qty)
300x300mm	20	68x36x39	12	5400pcs	11000pcs	14000pcs
600x600mm	8	66x68x23	18	2000pcs	4300pcs	5400pcs
1200x300mm	8	130x38x38	20	1100pcs	2200pcs	2800pcs
1200x600mm	6	130x68x23	19	780pcs	1600pcs	2000pcs