LED Panel Light

LED Panel Light

(UGR<19)


1.jpg

Features

Input voltage:

Lumen efficiency:

CRI:

LED chip:

Light guide plate:

LED driver:

Power factor:

Frame colour:

CCT:


Dimming:

IP grade:

Working Temp.:

Lifespan:

Warranty:


AC200-240V, 50-60Hz or AC85-265V,50-60Hz

120lm/W, 100lm/W two option available

80 (customized CRI>90 can be available)

Epistar SMD4014

PMMA or PS

brand drivers (Meanwell, Philips, LIFUD, AGT,Greenso, BOKE,
etc), drivers with TUV, CB, ENEC approved, no flicker

0.95, THD<17

while, silver

3000K, 4000K, 5000K, 6000K(customized CCT available,
precise to ±100K)

Triac, 1-10V, DALI,RGB, RGBW, CCT dimming available

IP44 (IP65 available)

-40°C-50°C

50000 hours

3 years



Parameter


b.png


UGR<19 panel photos

987.jpg


Test Report: 600x600mm,40W


test2x2.jpg


Test Report: 1200x300mm,40W


1x4.jpg


Luminous Decay Graph


llllllllllll.jpg


Installation

1.Recessed installation (no need accessory for LED panel)


1.jpg



Picture 10: Turn LED  panel 45 degree against the installation square space;

Picture 11 & 12: Upward the LED Panel for installation;

Picture 13 & 14: Turn LED Panel lighting face downword;

Picture 15: Finished installation;

Remark:

1) For recessed installation, first check the size’s fitting for the
panel light and the ceiling space;

2) No accessory for recessed installation;

3) Be sure all “+” and “-“ are jointed correctly;

4) Be sure all screws and connects are firmly fixed.


2.Suspended installation

Step 1: Attach hanging strings on led panel lights’ body

1.png

Picture 16: Take the hanging string;

Picture 17: Screw two nails to connect LED Panel with Hanging string;

Picture 18: Finished all hanging string, small size is four pieces, big size is six pieces;









Step 2: Attach hanging string to Ceiling

1.png

Picture 19: Open four φ5mm holes on the ceiling,and put holding parts inside, firmly fixed;

Picture 20: Screw the hanging ends inside;

Picture 21: Finish all screws and hanging the panel;











1.png

Picture 22: Connect LED Driver with state grid;

Picture 23: Finished installation and turn on power;


Remark:

1) Be sure all “+” and “-“ are jointed correctly;

2) Be sure all screws and connects are firmly fixed.












3.Imbedded installation(spring clips)

1.pngStep 1. Cut a hole on the ceiling and the cut-size need according to the actual size of the panel light.

Step 2. Connect cable to panel light correctly ,then press the spring buckle vertical and put the panel into the hole slowly.

Step 3. Reconfirm the cut-size and the cable-connection, then put down the spring buckle and make sure the panel has been fixed stable.


1.jpg


4. Mounted installation

Step 1. Install the mounted steel to the ceiling first, make sure it hold tightly with ceiling, fix well each screws.

Step 2. Put the panel to the steel, make sure each side fix well, then screw it tightly.


1.jpg


Patent design mounted frame( smart design, quick and easy installation, 2 minutes can install one light!)


1.jpg


Package info


LED panel size

pieces/ctn

carton size
(cm)

G.W(KGS)

20 GP container
can load (qty)

40 GP container
can load (qty)

40 HQ container
can load (qty)

300x300mm

20

68x36x39

12

5400pcs

11000pcs

14000pcs

600x600mm

8

66x68x23

18

2000pcs

4300pcs

5400pcs

1200x300mm

8

130x38x38

20

1100pcs

2200pcs

2800pcs

1200x600mm

6

130x68x23

19

780pcs

1600pcs

2000pcs


Customized paper box available


baozhuang.jpg